Installation Guide for the LSI Logic SDMS Drivers: SYMC8XX.SYS V4.16.00
SYM_HI.SYS V4.16.00
SYM_U3.SYS V5.08.00
This file describes the features and use of the LSI Logic SDMS device
drivers for the Windows NT 4.0 operating system environment. LSI Logic
uses the same filenames for their drivers for different Windows operating
systems. The driver files are packaged either in separate subdirectories
based on the Windows operating system or on different flex disks.
To determine the driver file for Windows NT 4.0, note that the filename ends
with ".sys". For example, SYMC8XX.SYS. (The same is true for Windows 2000.)
To determine the operating system version, go into Windows Explorer,
display the driver file, right click on the filename, click on Properties,
click on the Version tab. Finally, click on the Internal Filename in the
lower section. For Windows NT 4.0, the filename appears as filename (NT 4.0).
For example, SYMC8XX.SYS (NT 4.0).
This file contains these sections:
Introduction for Windows NT 4.0
Features
LSI Logic Devices Supported
I've installed this on QEMU + NT
<code>
qemu.exe -cpu pentium -m 256 -L pc-bios ^
-net nic,model=pcnet -net user ^
-drive file=scsi0.qcow2,if=scsi,bus=0,unit=0 ^
-drive file=scsi1.qcow2,if=scsi,bus=0,unit=1 ^
-drive file=scsi2.qcow2,if=scsi,bus=0,unit=2 ^
-drive file=scsi3.qcow2,if=scsi,bus=0,unit=3 ^
-drive file=scsi4.qcow2,if=scsi,bus=0,unit=4 ^
-option-rom 8xx_64.rom ^
-fda lsi.vfd ^
-cdrom nt4server.iso -boot d
</code>
Live Music
Archive
Librivox
Free Audio
Metropolitan Museum
Cleveland
Museum of Art
Internet
Arcade
Console Living Room
Open Library
American
Libraries
TV News
Understanding
9/11
